Absima CR4T Ultimate, Руководство пользователя

Страница: 27 / 42

27
k) A.B.S.
This feature allows the wheels from locking during braking by automatically pulsing (opening and closing the brakes)
to prevent. Thus it is possible to retain the control over the model even during heavy braking.
„Brake return“:
This determines how far the brake is released with each impulse. At 100%, the brake opens completely and the brake
servo returns after each pulse back to its neutral position. A value of 0% will be deactivate the "ABS function."
„Delay“:
Here can be set a time delay between the initiation of the "ABS" and the start of the braking action. A value of 0% means
no delay, a value of 100% means a delay of approximately 2 seconds.
„Cycle length“:
Here can be determined the duration of an ABS braking period (closed brake, brake open). A value of 20% corresponds
to about 100 ms, a value of 100% corresponds to about 500 ms.
„Trigger point“:
Here can be set a trigger point for the "ABS" function. The higher the value is, the longer the „ABS“ is activated.
A value of 100% means that the "ABS" function is activated only when braking hard.
„Duty cycle“:
Here can be set the behavior between closed and open brake, must be adjusted during a "ABS braking period."
At a value of -4 the brake while the "ABS braking period" is opened to about 10%, at a value of +4 to about 90%.
Picture 21