background image

31

q) Brake mixing

This feature allows you to control the brakes via two or three 

independent servos. Channels 3 (CH3), or 4 (CH4) can be used 

as the slave channels for throttle/brake servo, whereby only the 

brake function has an influence on the slave channels. After 

activating one of the two channels, can be adjusted for this 

channel the ABS and the exponential function of the individually 

throttle/brake servo. 

 

 

 

 

 

 

 

 

 

Select therefor the parameter to change. Move the controller to

the right or left to adjust the value according to your wishes.

Tap the button "back" in order to save the changes and return to

the menu.

 

 

 

 

r) Mixes

This feature allows you to simultaneously control two servos. 

The electronic portion of the main channel (master) is hereby 

mixed on a further channel (slave). You can adjust the direction 

individually. You can mix between all four channels.

 

 

 

  

 

Select a parameter to be mixed. Select the button 

"activate / deactivate". Move the controller to

the right or left to adjust the value according to your wishes.

Tap the button "back" in order to save the changes and return to

the menu. Tap the button "activate / deactivate" to deactivate the 

set value.

 

 

 

 

 

 

 

Picture 27

Picture 28

Содержание CR4T Ultimate











































Отзывы: