Absima CR4T Ultimate, Руководство пользователя

Страница: 24 / 42

24
e) Steering exponential
This feature allows you to influence the steering sensitivity.
Thereby the linear distance between the transmitter control and
servo is changed in a non-linear (exponential) way. A fine control
to the neutral position is possible. The maximum control path is
not changed.
„Exp.“:
The setting value is -100% to 100%, wherein the value
corresponding to 0% of the linear control. A change of the set
always affects simultaneously on both sides of the servo rash.
„Rate“:
Here, the slope of the curve is set. The adjustable value for the
slope of the curve is 0% to 100%. The smaller the increase,
the smaller the steering.
Select the button "activate". Select therefor the parameter to
change. Move the controller to the right or left to adjust the value according to your wishes.
Tap the button "back" in order to save the changes and return to the menu.
f) Steering speed
This function allows the speed of the steering servo perfectly
match your model. When not setting the steering servo, threatened
a loss of control of your model.
„Turn speed“:
The adjustable value for the turn speed is 0% to 100%.
„Return speed“:
The adjustable value for the return speed is 0% to 100%.
The values in the LCD display are shown in real time. The red bar
represents the position of the steering wheel, the green bar
represents the position of the steering servo.
Select therefor the parameter to change. Move the controller to
the right or left to adjust the value according to your wishes.
Tap the button "back" in order to save the changes and return
to the menu.
Picture 15
Picture 16