Absaar AB-MJS150, Руководство по эксплуатации, Страница: 9 / 36

Operating instructions
ABSAAR
9
5) DESCRIPTION OF THE PRODUCT
6) DESCRIPTION AND INDICATIONS OF THE LEDS
Description
and indication
of the "Power"
power supply
button
Indicator of the
charge status of the
internal battery.
Press the power supply button (6), the LED indicator (5) indicates the charge status
of the internal battery. When charging, the LEDs light up and flash one after the
other until fully charged. This is indicated when all the LEDs are lit.
Description of the
charge status levels
when recharging
the internal battery
of the Mini Jump -
starter.
The LEDs (5) indicate the charge status of the internal battery in relation to the
voltage of the internal battery
0%-25%
LED No.1 flashes
25%-50% LED No.1 und No.2 flash
50%-75% LED No.1, No.2 und No.3 flash
75%-99% LED No. 1, No.2, No.3 und No.4 flash
100 % (end of charging process) All the LEDs are lit continuously.
Description
of the charge
statuses when
recharging
the internal
battery of the
Mini Jumpstarter
Press the power supply button (6), the LED indicator (5) indicates the charge status
of the internal battery and automatically switches itself off after 30 seconds if no
charge is detected.
100%-75%
All the LEDs are lit.
75%-50% LED No. 1, No. 2 and No. 3 are lit
50%-25% LED No. 1 and No. 2 are lit
25%-1% LED No. 1 is lit
1%- 0% LED No. 1 flashes
0% All the LEDs are off
Others
Torch LED
lighting (1)
1- Double-click the „power“ power supply button (6) to light the torch (1).
2- Click again to activate the S.O.S. mode
3- Click again to activate the stroboscopic mode
4- Click again (or double click) to switch off the torch (1).
The torch (1) cannot be switched on when charging the battery or when the LEDs (5)
indicate that the internal battery‘s power is weak.
G
B
C
D
E
F
Description :
➊
Torch (LED lighting)
➋
Connector for the start-up assistance cable
➌
Micro USB 5 V - 1.5 A connector for recharging
➍
USB 5 V - 2.0 A output power for accessories.
➎
LED indicator of the charge level of the internal battery
➏
“Power” power supply button