AbleNet Responsable, Руководство пользователя и инструкция пользователя

Страница: 26 / 52

26
3. When Pendant learning has been successful you will
hear “All Systems are OK” and then it will announce
the call setting that the base is set to – Friends 911
Mode, Friends Only or 911 Only.
• If “Base and Pendant out of Range” or “Pendant
Learning Failed” is heard from the Base or Pendant,
STOP - wait 30 seconds and start at step #1 again.
Notes:
• You have up to 45 seconds after pushing the RED Code
Learn button on the base unit to get the pendant to
enter “Pendant Learning” Mode.
• Teaching additional pendants does not erase previously
learned pendants.
• The base unit will automatically exit the pendant learn-
ing mode after several seconds or if Pendant Learning
Failed.
• When more than 1 pendant is paired with the base, the
base unit will announce the pendant number when do-
ing testing like the battery test.
At a later point in time, you might want to erase your
previously learned Pendants. You can erase all previ-
ously learned Pendants by simply holding down the
red
Code Learn button at the back of the Base unit for
8 seconds. You will hear the confi rmation of “Previous
Pendant Codes Erased” from the Base unit. After that,
you can program a new Pendant to the base unit follow-
ing the steps above as desired.