AbleNet Responsable, Руководство пользователя и инструкция пользователя

Страница: 8 / 52

8
Installing the Batteries
Pendant - small white batteries
The Pendant requires one of the white/Li-Ion (Lithium
Ion) batteries at any given time. The pendant should be
able to run up to 4 months on a fully charged battery.
The second battery is to be charging in the Base unit
when not being used in the Pendant. There is no risk of
over charging while in the base charger.
Battery Cap
Li-ion
10440
To install the battery -
unscrew the battery cap of
the Pendant. Install the
battery with the negative side
up facing the cap. Screw
the cap back down snuggly
on the Pendant.
The Pendant Batteries are shipped from the factory
with a partial charge – and will only standby a short
period of time. Your unit has 2 pendant batteries and
it is recommended to exchange the battery that is in
the base charger with the battery in the pendant after
the fi rst day of use. This will ensure the battery in the
pendant is fully charged and will last several months
before needing to be exchanged/charged again.
You can check the battery status at any time by simply
pushing the gray battery test button on the back of the
Pendant for a second.