AbleNet Responsable, Руководство пользователя и инструкция пользователя

Страница: 25 / 52

25
Adding Additional Pendants to the System
The System comes with one Pendant. If you want to add
additional pendants to your system - follow the direc-
tions here.
The Pendant’s unique ID code should already be paired
with the Base unit when it came from the factory. You
can add a total of 4 Pendants and Emergency Wall Com-
municators (see “Replacement Parts / Optional Acces-
sories” on page 48) to the system by pairing each
pendant’s ID code with the Base unit.
To pair a new Pendant with the Base unit:
On the Base Unit:
1. Push and release the RED Code Learn button on the
back of the base unit. You will hear a voice prompt
“Pendant Learning”
On the Pendant:
2. PUSH the Gray Battery Test button and then IMME-
DIATELY push the Blue button –HOLD both buttons
until you hear “Pendant Learning” from the pendant
- then release both buttons on the pendant.
• If “Base and Pendant out of Range” or “Pendant
Learning Failed” is heard from the pendant, stop -
wait 30 seconds and start at step #1 again.
(Note: For the Emergency Wall Communicator, push and
hold the Red “Help” and gray test button).