AbleNet Responsable, Руководство пользователя и инструкция пользователя

Страница: 34 / 52

34
If you receive a failure notifi cation, please refer to the
“Troubleshooting Guide” on page 37 of this manual to
determine the cause.
This testing feature is very useful - allowing you to con-
fi rm that the system has coverage from all parts of your
home. Simply walk to the various parts of your home and
push the Battery Check / System Check button until you
hear the 4 beeps and then the dial tone. You can then
release the button, and you will hear the voice prompt
“All Systems are OK”, “Pendant and Base out of Range”,
or “System Cannot Detect Dial Tone”.
NOTE: If your telephone service offers voice mail and
the voice mail system uses a Stutter Dial Tone to notify
you of a message, the system test may fail – “cannot
detect dial tone” if a system test is made with a message
waiting. This is normal as the System is “listening” for
a conventional dial tone. Check your messages so the
dial tone returns to a solid tone and test again. In the
event of an emergency, the System will dial the emergen-
cy number regardless of a standard or stutter dial tone.
Caution - To ensure proper operation, this equipment
must be installed according to the these instructions.
We highly recommend that you perform this System
Check after set-up and installation and at least twice a
month to confi rm that your system is working properly
and that the pendant and base unit are in good commu-
nication and that the base unit can get a dial tone. It is
also recommended to perform this system check after a
lightning storm that could damage the base unit which is
plugged into the phone line.