User Manual Version 1.5
SE5001 Ethernet Serial Server
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
29
Figure 3.25 Configure success
3.4 Assign a New IP Address by ARP Command
Use ARP command to assign a static IP address of SE5001 using its hardware MAC address. The MAC
address is printed on the rear side of device in the format of "0060E9-xxxxxx". The following example shows
how it works within MS-DOS command prompt window.
(For example change IP from 10.0.50.100 to 10.0.50.101,and the MAC address of SE5001 is
00-60-e9-11-11-01)
Step1:
Add the new host IP to ARP table
->Open Ms-DOS command prompt window
->Input
arp -s 10.0.50.101 00-60-E9-11-11-01
(Figure 3.26)
Figure 3.26. Ms-DOS command prompt window
Step2:
Change to new IP via telnet port 1 (Figure 3.27)
->Input
telnet 10.0.50.101 1
Note:
The telnet will be fail and SE5001 will be restarted automatically, after restart the IP address
should be change to 10.0.50.101
Step3:
Using new IP to configure SE5001 via telnet
->Input
telnet 10.0.50.101
Note
1: When using this method to change IP address, PC's IP address and SE5001 's IP address
must belong to the same subnet.
Note
2: The changed IP address must be legal, otherwise it will be changed back to the default value
(10.0.50.100) after restart.
