User Manual Version 1.5
SE5001 Ethernet Serial Server
Copyright © 2006 Atop Technologies, Inc.
All rights reserved. Designed in Taiwan.
13
3.2 Configuration by Telnet Utility
One can use Telnet utility to change configuration settings of SE5001 by following steps
：
3.2.1 Login to the System
->
Open Ms-DOS command prompt window
->
Telnet to SE5001 using command “
Telnet IP_address
”.( For example
：
Input
Telnet 10.0.50.100
in
Ms-DOS command prompt window).After telnet to SE5001, system prompts for a password, the default
password is left it blank. (Figure 3.4)
Figure 3.4 Login to the system
Note:
One can press the default button of SE5001 to reset the password to the default value.
1. After verifying the password, the following terminal screen appears.( Figure 3.5)
Figure 3.5 Main menu
