BAL.0140 • 2018-10-15
DE - 19
PP Plus 36D/240D/401D
8 Entsorgung
7.3 Brennerhals wechseln
1
Gasdüse abnehmen.
2
Schweißspritzer entfernen und mit
ABICOR BINZEL
-Antispritzerschutzmittel einsprühen.
3
Verschleißteile auf sichtbare Schäden überprüfen und ggf. austauschen.
4
Neck-Liner bzw. Drahtführung bei Verschleiß oder Verschmutzung austauschen.
5
Trennstelle säubern und O-Ringe mit silikonfreiem Dichtfett einfetten.
8 Entsorgung
VORSICHT
Verletzungsgefahr
Verbrennungen durch herumspritzendes Kühlmittel.
• Schalten Sie den Kühlkreislauf ab.
HINWEIS
• Achten Sie darauf, dass kein Restkühlmittel in den Drahtförderschlauch gelangt!
• Halten Sie beim Abschrauben des Brennerhalses den Brennerhandgriff stets nach unten.
So vermeiden Sie das Eindringen von Restkühlmittel in die Gas- und Drahtführung.
HINWEIS
• Fetten Sie die O-Ringe mit silikonfreiem Gleitmittel (192.0078) ein. Das erleichtert das
Einsetzen des Brennerhalses und verlängert die Lebensdauer der O-Ringe.
HINWEIS
• Entsorgen Sie das Gerät nicht über den Hausmüll.
• Beachten Sie bei der Entsorgung die örtlichen Bestimmungen, Gesetze, Vorschriften,
Normen und Richtlinien.