Abicor Binzel iCAT mini ABIROB G, Руководство по эксплуатации

Страница: 48 / 100

EN - 24 BAL.0361.0 • 2017-05-05
11 Disassembly iCAT mini
11.1 Standard model
1 Disconnect the cable assembly from the wire feeder.

Fig. 5 Maintenance position of the robot on page EN-12
Versions ABIROB
®
G350:
2
Remove protective cap
(1)
and bellows
(5)
, loosen cylinder head
screw
(6)
.

Fig. 10 Attaching the ABIROB
®
torch neck on page EN-17
3
Disconnect the torch neck and remove it.

7 Operation on page EN-19
4
Disassemble the
iCAT mini (1)
from the robot
(7)
.

Fig. 6 Attaching the iCAT mini to the robot on page EN-13
11.2 Model with wire brake
1
Disconnect the cable assembly from the wire feeder.
2 Remove the protective cap (1) .
3 Pull the plastic tube (4) out of the wire brake (3) .
4 Unscrew the wire brake (3) .
5 Pull off the bellows (2) over the torch neck.

Fig. 13 Cleaning—model with wire brake on page EN-21
6 Loosen the mounting screw (6) .

Fig. 10 Attaching the ABIROB
®
torch neck on page EN-17
7 Disconnect the torch neck and remove it.

7 Operation on page EN-19
8 Disassemble the iCAT mini (1) from the robot (7) .

Fig. 6 Attaching the iCAT mini to the robot on page EN-13
NOTICE
• Disassembly must only be carried out by qualified personnel
(in Germany, see TRBS 1203).
• Consult the operating instructions for the following welding components:
robot welding power source and welding torch.
• Observe the information provided in the following section:

8 Decommissioning on page EN-19