EN - 17
ABIMIG
®
XX0/XX5
10 Disposal
1
Unscrew the cable assembly on the machine side and bring it into a
stretched position.
2
Loosen the fixation of the liner or PA liner nipple at the end of the machine
and pull out or replace the liner or PA liner.
3
Remove wear parts from the torch neck and unscrew rotating or
changeable torch neck.
4
Clean BIKOX
®
cable assembly from both sides with compressed air.
5
Mount cleaned or replaced wear parts and liner or PA liner.
6
Connect cable assembly on the machine side to the wire feed unit.
10 Disposal
WARNING
Risk of injury
Injury caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable
protective clothing, in particular safety goggles.
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards
and guidelines.
