ABEM Terraloc Pro 2
33
-
The
Record View
t
Position of the timeline (ms)
A/D
Measured value at timeline. Unit is available as raw A/D-value,
V,
mV, mm/s or cm/s. This is selectable in the view options dialog
-
The
Trace View
t
Position of the timeline (ms)
A/D
Measured value at timeline. Unit is available as raw A/D-value,
V,
mV, mm/s or cm/s. This is selectable in the view options dialog
dT
The relative time (ms), the corresponding frequency within parenthesis.
Only displayed when the reference time marker is used
-
The
Frequency View
f
Frequency (Hz)
Level
Amplitude (db)
Table 4 Bottom row information
Figure 32 The Record Status Bar with Trace View time
4.4.7 Application Status Bar
The
Application Status Bar
displays general status information.
There are seven separate fields on the bar:
Field
Description
The current record
number
Is used the next time an acquired record is saved
The active acquisition
mode
Standard, Roll-along, or Optimum offset
The current
instrument state
For possible states see Table 5 below
Power source status
Internal with voltage
External
Error or warning alert
for channels
Each board in the instrument has a one-character place in this
field. See the three dashes in Figure 15. The
System
Содержание Terraloc Pro 2
Страница 1: ...User Manual Terraloc Pro 2 ABEM 20181009 based on release 3 0 4 of SeisTW ...
Страница 6: ...ABEM Terraloc Pro 2 iv ...
Страница 73: ...ABEM Terraloc Pro 2 71 Free end to the left Free end to the right Free end up Free end down Free end left ...
Страница 74: ...ABEM Terraloc Pro 2 72 Free end up Moved to the right ...