User Operations Guide—Mira Instant Replay Server
Revised: 5 September 2014
Copyright ©2014, Abekas Incorporated
333
3.
Tap
button then tap
button (or
vice-versa) to continuously loop the clip that
is loaded in the PGM channel of the playlist.
The LED below the
button will slowly
flash GREEN, to indicate the LOOP function is
active.
You may enable or disable the
button
while
(PLAY LIST AIR)
mode is
active and while a clip in the playlist is already
playing out.
4.
Tap
button to deactivate the LOOP
function.
The
button will stop flashing.
The clip will play to its out-point, and obey the
“@END”
flag for the clip.
Tap
button to transition to the
next item in the playlist.
The clip will immediately transition to the next
item in the playlist as soon as the
button is tapped, without playing to its out-point.
IMPORTANT NOTE! When the
function is ON, it will override the “
@END
” flag that’s programmed for the playlist item that’s
currently ON-AIR (item in “PGM” channel, not “PVW” channel), as shown in the table on the following page.
IMPORTANT NOTE! When
function
(LIST LOOP)
is ON, the LED below the button will flash AMBER in color.
IMPORTANT NOTE! When both the
function
and
the single clip
function are ON at the same time, the LED below the button
will alternately flash between GREEN
and
AMBER. In such a case, the single clip
function will be honored first, and thus will require
a tap of the
button to advance to the next item in the playlist (because the current playlist item will be looping).
OR
3
4
4
