3. Tap the
MRI Mode
toggle button.
3.
4. When the “Set Generator to MRI Mode” message
4.
appears, tap
Continue
. Stimulation stops, and the
patient controller app checks the system for any
issues. If the checks are successful, the “Proceed
with MRI” message appears and the MRI mode
is on.
NOTE: If a warning screen appears instead of the
“Proceed with MRI” message, you cannot set the
IPG to MRI mode and cannot receive an MRI scan.
Refer to “Troubleshooting” (page 63) for more
information.
5. Tap
OK
.
5.
CAUTION: Do not delete the paired Bluetooth®
wireless connection between the IPG and the
patient controller and do not delete the IPG from
the Generators list while the system is in MRI
mode. Doing so will prevent the system from
disabling MRI mode, which may prevent therapy
from being turned on again.
Disabling the MRI Mode
After your procedure, you need to disable the MRI
mode to restart stimulation. To disable the MRI mode:
1. Launch the patient controller app and connect with
1.
your generator. You should see the following screen,
showing that the IPG is in MRI mode.
43
Содержание NeuroSphere 3875
Страница 1: ...NeuroSphere Patient Controller Dorsal Root Ganglion Neurostimulation Systems Model 3875 User s Guide ...
Страница 56: ...If you only have one area you will see the following screen Figure 15 Strength screen One Area 52 ...
Страница 96: ...www abbott com 2022 08 ARTEN600266402 A 600266402 ...