ABB XSeries G4 6200 Скачать руководство пользователя страница 90 | Manualshive

Страница: 90 / 168

ABB XSeries G4 6200 Скачать руководство пользователя страница 90

Page 3

–28

2104349 rev. AD

Figure 3

–30 Application Credit verification codes

3.5.4 Transferring credits to the G4 EX from the Credit Key

Credits can be transferred to the G4 EX. The user selects the type of credits and
the amount of those credits to be transferred.

If the G4 EX has a surplus of credits, these credits can be
transferred to the credit key to be used on the other meters. This
is discussed in a later section.

To transfer application credits to the G4 EX, the user will need to connect to the
G4 EX with PCCU32 7.0 or later.

1) Open PCCU32. Once open, move to the top of the tree-view, and click on

the App Licensing tab (see

).

2) Install the credit key in an available USB port.

3) Click the Load button to view the available credits.

This screen enables the user to see the licensing status of the G4
EX as well as the available credits on the credit key. The left pane
shows the type and amount of the available credits on the credit
key.  The  upper  right  pane  is  for  information  purposes  only.  It
shows the various available applications and the type/amount of
credits necessary to run the application. The standard credits (and
four general credits) are free with the purchase of the G4 EX. The
lower  right  pane  displays  the  licensing  status  of  the  G4  EX.  It
shows  what  credits  are  in  the  machine,  what  credits  are  being
used and any surplus or deficit of credits. A surplus  of credits is
highlighted in green. A deficit of credits is highlighted in red.

«
...
88
89
90
91
92
...
»

Содержание XSeries G4 6200









































































































































































Отзывы:

Нет отзывов