ABB XSeries G4 6200, Руководство пользователя, Страница: 72 / 168

Page 3
–10
2104349 rev. AD
Figure 3
–10 System Setup window
8) Exit PCCU32 and the local connection.
9) With the Ethernet cabling installed, connecting to the meter is no different
than when using the PCCU cable or military connector. Click on the
Connect to Totalflow icon in the PCCU32 toolbar. To connect and move
directly to Entry mode, click on Entry instead of the Connect icon.
If the user has several meters on their network, they may find it
helpful to create a desktop shortcut for each meter. For
instructions on how to accomplish this task, follow steps 10
– 12;
otherwise, the user may continue on to the next section.
10) Create a desktop shortcut, and assign a name to it. For the sake of the
example, the following will use the mete
r’s ID for the shortcut name.
11) The user will now need to point to the version of PCCU32 that they want to
use (the user may have multiple versions of PCCU32 on their laptop). It
should be noted that it must be PCCU32 version 7.05.5 or later.
12) The user will then need to identify the network protocol to be used (TCP)
and the network ID (see Figure 3
–11).
For example:
- Point to the folder with PCCU32 in it.
- Point to PCCU32.exe.
- Point to the protocol (TCP).