ABB XSeries G4 6200, Руководство пользователя, Страница: 78 / 168

Page 3
–16
2104349 rev. AD
Figure 3
–15 Security Setup dialog box
If the Security Switch (S2) on the termination board is in the
Off position, no security code has to be entered to access
the operating parameters, even if there is one programmed
into the device.
3.4.2 WinCCU32 software security
WinCCU32 also requires the appropriate security codes be entered in the Device
ID (see Figure 3
–16).
1) Highlight the appropriate meter in WinCCU, and click Edit ID.
2) Enter either the level 1 or level 2 security code.
3) Click OK.