Tel: (888) 552-6467
Fax: (800) 316-4515
www.tnb.com
06/18 750.1781_Rev. H
6/12
300/600W Mini Inverter
ACTUAL POSITION OF COMPONENTS WILL VARY
Switched or
Input Wiring
Neutral
Lighting Load
Un-Switched
Neutral
Ground
Line
Output Wiring
Triac Dimmer
Device
Fluorescent, LED,
Incandescent
120Vac
Neutral
120V
Neutral
Ground
Primary
Un-Switched
AC Input
(see note 3)
(see note 3)
Wall Switch
Normally ON
Lighting Load
FIGURE 2A
WIRING DIAGRAM:
SWITCHED
NORMALLY ON LOAD
Notes:
1.
Connect fixture supply and unit
ground in accordance with local and
national codes.
2.
Single voltage wiring only. Either
120V or 277V or 347V. Input and
output voltage must be the same.
3.
DO NOT COMBINE THE INPUT
POWER NEUTRAL WITH THE
LOAD NEUTRAL.
Primary
Un-Switched
AC Input
Normally ON
Lighting Load
Wall Switch
Wall Switch
120Vac
Neutral
(see note 3)
347Vac
Primary
Un-Switched
AC Input
Normally ON
Lighting Load
Neutral
(see note 3)
Ground
Ground
347Vac
Neutral
(see note 3)
120Vac
Neutral
(see note 3)
Ground
Neutral
Line
Switched Line
Un-Switched Line
Neutral
FIGURE 2B
WIRING DIAGRAM:
NORMALLY OFF LOAD
Lighting Load
Fluorescent, LED,
Incandescent
Notes:
1.
Connect fixture supply and unit ground in
accordance with local and national
codes.
2.
Single voltage wiring only. Either 120V or
277V or 347V. Input and output voltage
must be the same.
3.
DO NOT COMBINE THE INPUT
POWER NEUTRAL WITH THE LOAD
NEUTRAL.
Input Wiring
Output Wiring
120Vac
Neutral
120V
Neutral
Ground
(see note 3)
(see note 3)
Primary
Un-Switched
AC Input
Normally ON
Lighting Load
Primary
Un-Switched
AC Input
Normally ON
Lighting Load
120Vac
Neutral
(see note 3)
347Vac
Primary
Un-Switched
AC Input
Normally ON
Lighting Load
Neutral
(see note 3)
Ground
Ground
Neutral
(see note 3)
347V
Neutral
(see note 3)
120Vac
IMPORTANT:
FOR NORMALLY OFF LOADS:
REMOVE JUMPER WIRE.
