BUSCH-/ABB-SECURE@HOME
2CSM600727D0901
17/74
3.1.3
Global disarming
Global disarming of the intrusion system can only be performed by Users (PIN level 2) and by
the Installer (PIN level 3 - if authorised by a level 2 User) that has permission on all the zones.
To disarm the entire intrusion alarm system using the keypad:
1.
Repeat points 1 and 2 from the previous paragraph
2.
Select "Disarmed".
The central unit will beep 1 time and the intrusion alarm system will be disarmed.
3.1.4
Partial arming
The partial arming of the intrusion system can only be performed by Users (PIN level 2) and
by the Installer (PIN level 3 - if authorised by a level 2 User) on the zones for which they have
been authorized.
To partially arm the intrusion system using the keypad:
1.
Repeat points 1 and 2 from the previous paragraph
2.
Only the enabled zones will appear. Select the zone that you wish to arm. If a specific
name has been given to the zone during programming, this will appear instead of the
generic names Zone A, Zone B, etc.
3.
Using the arrow keys, select:
-
Away mode
to arm the system in Away mode,
-
Home mode
to arm the system in Home mode,
-
Notification
to arm the system in Notification mode,
and confirm your selection using the
ok
key.
The central unit will beep 3 time and the intrusion alarm zones will be armed.
If you wish to arm other zones, repeat the entire procedure for each zone to be armed
3.1.5
Partial disarming
Partial disarming of the of the intrusion system can be performed by Users (PIN level 2) and
by the Installer (PIN level 3 - if authorised by a level 2 User) on the zones for which they have
been authorized.
To partially disarm the intrusion alarm system using the keypad:
1.
Repeat points 1 and 2 from the previous paragraph
2.
Select the zone that you wish to disarm. If a specific name has been given to the zone
during programming, this will appear instead of the generic names Zone A, Zone B,
etc.
3.
Select "disarmed"
The central unit will beep 1 time and the selected zones will be disarmed.
3.2
Arming or disarming using the remote control
There are two types of remote control:
-
Programmable remote control: this can be customised, and so there is not pre-set
key to arm or disarm the entire system.
-
Pre-programmed remote control: specific functions are assigned to the keys
Refer to the manual of each remote control for a guide to arming and disarming the system.
