BUSCH-/ABB-SECURE@HOME
2CSM600727D0901
7/74
USE THE SYSTEM
This section contains all of the information that the user needs for day-to-day use of the
central unit and the intrusion alarm system, including some configuration procedures.
2
COMMAND INTERFACE
2.1
Display
The liquid crystal display screen shows all of the information relevant to the configuration of
the central unit and operation of the system. It may contain up to 8 lines of text with up to 20
characters each, or a series of icons, or a combination of text and icons.
The display is normally off, and lights up when a key is pressed.
When idle, the screen displays the following information:
-
Status of the system (armed/disarmed/partial armed (Note1))
-
2 icons to indicate, from left to right, the status of the central unit power supply and
the GSM connection.
Pressing the
key once will bring up detailed information on the status of the individual
zones, while pressing it a second time:
o
central unit FW release number
o
physical address (8 digits) of the central unit
o
date - time
o
connection to ABB-free@home
o
gateway free@home fW release number
o
touch keyboard Fw level
o
battery level
Note 1:
Armed
All zones are armed using the same method
Disarmed
All zones are disarmed
Partially armed
Not all zones are armed or they are armed in a non-uniform manner
System Disarmed
