Selected through fault report data table
GUID-BDABA774-DE1A-4F47-A2B6-986641B903CC v1
The report data table shows a detailed view of the selected through fault report. Based on the
PTRSTHR function configuration, the windings columns are displayed. If the function is
configured with two windings, Winding 1 and Winding 2 columns are displayed in the report
data table. Based on the through fault reports data in the IED, visibility of the columns in the
Report overview table are handled dynamically.
In case of 2-winding transformers:
•
The Winding 3 column is hidden and not shown in the report overview table.
•
The Winding 3 related data will have zero values corresponding to General and Name
columns.
IEC18000082-1-en.vsdx
IEC18000082 V1 EN-US
Figure 42: Selected through fault report data table
Reading through fault reports from the IED
GUID-B7414006-344C-46CE-BFE7-FD707B672B92 v1
To read the through fault reports from the IED, perform either one of the following:
•
Select the IED menu and click on the Read through fault reports option.
•
Click on the Read through fault reports
button on the tool bar.
The through fault reports are read from the IED, and a confirmation dialog box appears.
1MRK 500 127-UEN D
Section 7
Operating procedures
670 series
59
Operation manual
