Commands
Table 4:
Command push-buttons
Name
Description
Menu
•
Moving directly to Main menu, if currently
in any other menu or view.
•
Moving to the default view, if currently in
Main menu.
R/L
Changing the control position (remote or local)
of the device.
•
When the R LED is lit, remote control is
enabled and local control disabled.
•
When the L LED is lit, local control is
enabled and remote control disabled.
•
When none of the LEDs are lit, both control
positions are disabled.
Clear
•
Activating the Clear/Reset view.
Help
Showing the help menu.
Multipage
Opening alarm panel and selecting alarm page
from the view.
Function buttons
Table 5:
Function buttons
Name
Description
Function
button
Executing the defined function: OFF, menu short cut or binary control.
4.1.4
Local HMI functionality
4.1.4.1
Protection and alarm indication
GUID-09CCB9F1-9B27-4C12-B253-FBE95EA537F5 v17
Protection indicators
The protection indicator LEDs are Ready, Start and Trip.
The yellow and red status LEDs are configured in the disturbance recorder
function, DRPRDRE, by connecting a start or trip signal from the actual function
to a BxRBDR binary input function block using the PCM600 and configure the
setting to
Off, Start or Trip for that particular signal.
Table 6:
Ready LED (green)
LED state
Description
Off
Auxiliary supply voltage is disconnected.
On
Normal operation.
Flashing
Internal fault has occurred.
Section 4
1MRK 500 127-UEN D
Overview
24
670 series
Operation manual
