ABB Relion 670 series, Руководство по эксплуатации

Страница: 33 / 100

IEC13000244-1-en.vsd
GUID-40BD0177-1CB8-48D6-B149-D25BD109C78F V1 EN-US
Figure 10: Example of a single-line diagram
4.2 Authorization
GUID-981A881D-9229-45E8-9EE5-D6DF2CA457E5 v5
User roles with different user rights are predefined in the IED. It is recommended to use user
defined users instead of the predefined built-in users.
The IED users can be created, deleted and edited only with PCM600. One user can belong to
one or several user roles. By default, the users in Table 10 are created in the IED, and when
creating new users, the predefined roles from Table 11 can be used.
At delivery, the IED user has full access as SuperUser until users are created
with PCM600.
Table 10: Default users
User name User rights
SuperUser Full rights, only presented in LHMI. LHMI is logged on by default until other users are
defined
Guest Only read rights, only presented in LHMI. LHMI is logged on by default when other users are
defined (same as VIEWER)
Administrator Full rights. Password: Administrator. This user has to be used when reading out
disturbances with third party FTP-client.
Table 11: Predefined user roles according to IEC 62351-8
User roles Role explanation User rights
VIEWER Viewer Can read parameters and browse the menus from LHMI
OPERATOR Operator Can read parameters and browse the menus as well as perform
control actions
ENGINEER Engineer Can create and load configurations and change settings for the IED
and also run commands and manage disturbances
INSTALLER Installer Can load configurations and change settings for the IED
SECADM Security
administrator
Can change role assignments and security settings. Can deploy
certificates.
Table continues on next page
1MRK 500 127-UEN D Section 4
Overview
670 series 27
Operation manual