IEC15000063.vsdx
IEC15000063 V1 EN-US
4.
Edit the string using the on-screen keyboard.
5.
Select OK on the on-screen keyboard or press
while the string editing field is focused
to accept the entered string is accepted and the editing dialog is closed.
5.1.13.3
Editing enumerated values
AMU0600417 v6
1.
Activate the setting mode and select a setting.
When editing an enumerated value, the selected value is shown inverted.
2.
Press
or
to change the value of an active enumerated value.
One press changes the enumerated value by one step in the parameter specific order.
5.1.13.4
Changing time settings in LHMI
GUID-0EE1EA01-D75F-4F3E-825F-ACD59D5A160F v3
If there is a need to change the time setting in the LHMI (Main menu/Configuration/Time/
System time/SYSTEMTIME:1) the change will take affect immediately. To confirm the new
setting press
. To remove the change, press
.
5.1.14
Saving settings
GUID-80F52D5D-539E-478E-97AC-4E33897E5085 v6
Editable values are stored in the non-volatile flash memory. Most of the parameter changes
take effect immediately after storing, but some parameter changes require application
restart. Values stored in the flash memory remain in effect after reboot as well.
1.
Press
to confirm any changes.
2.
Press
to move upwards in the menu tree or
to enter the Main Menu.
3.
To save the changes in non-volatile memory, select
Yes
and press
.
IEC13000245-1-en.vsd
GUID-8D804426-35FD-48A8-9E63-CCBB625327EA V1 EN-US
Figure 29: Confirming settings
•
To exit without saving changes, select
No
and press
.
•
To cancel saving settings, select
Cancel
and press
.
1MRK 500 127-UEN D
Section 5
Using the HMI
670 series
43
Operation manual
