manualshive.com logo in svg

ABB Relion 670 series REC670, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB Relion 670 series REC670 Скачать руководство пользователя страница 2

Contents

1. Application.....................................................................3
2. Available functions..........................................................4
3. Differential protection......................................................9
4. Current protection..........................................................9
5. Voltage protection........................................................11
6. Frequency protection....................................................12
7. Multipurpose protection................................................12
8. Secondary system supervision.....................................12
9. Control.........................................................................13
10. Scheme communication..............................................15
11. Logic...........................................................................15

12. Monitoring...................................................................16
13. Metering......................................................................18
14. Basic IED functions.....................................................18
15. Human machine interface............................................18
16. Station communication ...............................................19
17. Remote communication..............................................19
18. Hardware description..................................................20
19. Connection diagrams..................................................22
20. Technical data.............................................................29
21. Ordering......................................................................75

Disclaimer

The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any
errors that may appear in this document.

© Copyright 2012 ABB.

All rights reserved.

Trademarks

ABB and Relion are registered trademarks of the ABB Group. All other brand or product names mentioned in this document may be trademarks or registered
trademarks of their respective holders.

Bay control REC670

1MRK511232-BEN E

Pre-configured

 

Product version: 1.2

 
 

2

ABB

Содержание Relion 670 series REC670





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды