ABB Relion 620 Series, Руководство по применению

Страница: 10 / 90

Section 1
1MAC308145-MB E
Introduction
4 RER620
Application Manual
1.3 Product documentation
1.3.1 Product documentation set
Figure 1: The intended use of manuals in different lifecycles
The engineering manual contains instructions on how to engineer the relays using the
different tools in PCM600. The manual provides instructions on how to set up a PCM600
project and insert relays to the project structure. The manual also recommends a sequence
for engineering of protection and control functions, LHMI functions as well as
communication engineering for IEC 61850 and DNP3.
The installation manual contains instructions on how to install the relay. The manual
provides procedures for mechanical and electrical installation. The chapters are organized
in chronological order in which the relay should be installed.
The operation manual contains instructions on how to operate the relay once it has been
commissioned. The manual provides instructions for monitoring, controlling and setting
the relay. The manual also describes how to identify disturbances and how to view
calculated and measured power grid data to determine the cause of a fault.
The application manual contains application descriptions and setting guidelines sorted per
function. The manual can be used to find out when and for what purpose a typical
protection function can be used. The manual can also be used when calculating settings.
The technical manual contains application and functionality descriptions and lists function
blocks, logic diagrams, input and output signals, setting parameters and technical data
Planning &
purch
ase
Engine
ering
Instal
ling
Commissio
ning
Ope
ration
Maintenance
D
eco
mmissioning
Deinstalli
ng
&
D
ispo
sal
Application manual
Operation manual
Installation manual
Engineering manual
Communication Protocol
manual
Technical manual
Protocol Points List
manual