4.1.9.3
Changing the default view
The default view of the display is
Measurements
unless set otherwise.
1.
Select
Main menu/Configuration/HMI/Default view
and press
.
2.
Change the default view with
or
.
3.
Press
to confirm the selection.
4.1.10
Viewing single-line diagram
The single-line diagram is created with PCM600. The single-line diagram is active
only when the large screen is used.
•
Select
Main menu/Control/SLD
to view the single-line diagram or press
to navigate between main menu, measurement and single-line diagram.
GUID-BA9EE384-E2F7-4390-9F7B-01E764703820 V1 EN
Figure 16:
Single-line diagram with one breaker and IEC symbols
GUID-DC9A8A5E-3EBF-4C03-A3BC-CAD34B85269E V1 EN
Figure 17:
Single-line diagram with one breaker and ANSI symbols
Select the single-line diagram for the default view in
Main menu/
Configuration/HMI/Default view
.
Section 4
1MRS756708 C
Using the HMI
38
615 series
Operation Manual