The time between selecting the object and giving a control
command is restricted by an adjustable time-out. When an object is
selected, the control command has to be given within this time.
6.2.2
Controlling with single-line diagram
In the single-line diagram view it is possible to open and close the controllable
object. The position indication of the object can be seen on the single-line diagram.
1.
Select the object with
or
if there are more than one controllable object
in the single-line diagram.
The selected object has a square around it.
GUID-BA9EE384-E2F7-4390-9F7B-01E764703820 V1 EN
Figure 63:
Single-line diagram with one breaker and IEC symbols
GUID-DC9A8A5E-3EBF-4C03-A3BC-CAD34B85269E V1 EN
Figure 64:
Single-line diagram with one breaker and ANSI symbols
2.
Press
to open or
to close the selected object.
3.
Enter the password when prompted.
4.
Select
Yes
and press
to confirm.
Section 6
1MRS756708 C
Operating procedures
80
615 series
Operation Manual
