ABB NMBP-01, Руководство по установке и запуску

Страница: 53 / 66

Appendix B – Parameter Scaling
Installation and Start-up Guide for NMBP-01 B-5
13 ANALOGUE INPUTS
13.1 MINIMUM AI1 41301 1 = 0 mA; 2 = 2 V; 3 = TUNED VALUE; 4 = TUNE
13.2 MAXIMUM AI1 41302 1 = 10 V; 2 = TUNED VALUE; 3 = TUNE
13.3 SCALE AI1 41303 0 ... 100 %
10000 100 %
13.4 FILTER AI1 41304 0 s ... 10 s
1000 10 s
13.5 INVERT AI1 41305 0 = NO; Hex FFFF = YES
13.6 MINIMUM AI2 41306 1 = 0 mA; 2 = 4 mA; 3 = TUNED VALUE; 4 = TUNE
13.7 MAXIMUM AI2 41307 1 = 20 mA; 2 = TUNED VALUE; 3 = TUNE
13.8 SCALE AI2 41308 0 ... 100 %
10000 100 %
13.9 FILTER AI2 41309 0 s ... 10 s
1000 10 s
13.10 INVERT AI2 41310 0 = NO; Hex FFFF = YES
13.11 MINIMUM AI3 41311 1 = 0 mA; 2 = 4 mA; 3 = TUNED VALUE; 4 = TUNE
13.12 MAXIMUM AI3 41312 1 = 20 mA; 2 = TUNED VALUE; 3 = TUNE
13.13 SCALE AI3 41313 0 ... 100 %
10000 100 %
13.14 FILTER AI3 41314 0 s ... 10 s
1000 10 s
13.15 INVERT AI3 41315 0 = NO; Hex FFFF = YES
14 RELAY OUTPUTS
14.1 RELAY RO1 OUTPUT 41401 1 = NOT USED; 2 = READY; 3 = RUNNING; 4 = FAULT; 5 = FAULT(-1);
6 = FAULT(RST); 7 = STALL WARN; 8 = STALL FLT; 9 = MOT TEMP WRN;
10 = MOT TEMP FLT; 11 = ACS TEMP WRN; 12 = ACS TEMP FLT;
13 = FAULT/WARN; 14 = WARNING; 15 = REVERSED; 16 = EXT CTRL;
17 = REF 2 SEL; 18 = CONST SPEED; 19 = DC OVERVOLT;
20 = DC UNDERVOL; 21 = SPEED 1 LIM; 22 = SPEED 2 LIM;
23 = CURRENT LIM; 24 = REF 1 LIM; 25 = REF 2 LIM; 26 = TORQUE 1 LIM;
27 = TORQUE 2 LIM; 28 = STARTED; 29 = LOSS OF REF; 30 = AT SPEED;
31 = ACT 1 LIM; 32 = ACT 2 LIM
14.2 RELAY RO2 OUTPUT 41402
14.3 RELAY RO3 OUTPUT 41403
Parameter
4xxxx
Register
Alternative Settings Scaling
0 0 %
0 0 s
0 0 %
0 0 s
0 0 %
0 0 s