ABB NMBP-01, Руководство по установке и запуску

Страница: 20 / 66

Chapter 4 – Electrical Installation
4-4 Installation and Start-up Guide for NMBP-01
Fibre Link The fibre link is used for electrically isolating the option modules from the
high power components. Handle the optic cables with care. For ratings of the
optic cables ABB is supplying with the drives, see Table 4-1 below.
Table 4-1 Fibre Optic Cable Ratings.
The fibre link must be connected between the drive NAMC-01 board and the
NMBP-01 Module. Two fibres are needed to connect the Modbus Plus mod-
ule to the drive. See Figure 4-4 below for correct connection.
Figure 4-4 NAMC Board Fibre Connection.
Parameter Minimum Maximum Unit
Storage Temperature -55 (-67) +85 (185) ° C (° F)
Installation Temperature -20 (-4) +70 (158) ° C (° F)
Short Term Tensile Force 50 N
Short Term Bend Radius 25 (
31
/
32
” ) mm (in)
Long Term Bend Radius 35 (1
3
/
8
” ) mm (in)
Long Term Tensile Load 1 N
Flexing 1000 cycles
Comm. Modules
CH3
V
2
0V
1
9
V
1
8V
1
7
V
1
6V
1
5
V
1
4V
1
3
CH2
CH1
CH0
V1
4
V
1
3
INV
X1
4
PC Tool
Extended I/O
Standard I/O
Motor Control
NMBP-01 V3
NMBP-01 V4