manualshive.com logo in svg

ABB Navigator 550, Руководство по эксплуатации

Поделиться
Скачать
ABB Navigator 550 Скачать руководство пользователя страница 38

Navigator 500

Sodium analyzer

6 Operation overview – transmitter

36

OI/ASO550–EN Rev. G

6.8 Logging

Data recorded in the transmitter's internal memory can be
archived to a removable Secure Digital (SD) card or USB stick.
The transmitter continuously records 

all

 data to its internal

memory and keeps track of which data has been archived.

The amount of time that data remains in the transmitter's
internal memory depends on the sample rate – see Table 6.4.
Sample data is saved to removable media as comma-separated
files.

Configuration files are saved as binary-encoded files. Additional
files can also be archived:

Event log files (these files contain 

Audit Log, Alarm Log,

Diagnostic Log

 and 

Calibration Log

 data)

Data log files

Configuration files

The transmitter’s internal memory supports a maximum of 10

Data Log

 and 

Event Log

 files only and a maximum of 8

Configuration

 files. Durations for continuous recording are

shown in Table 6.4 (internal storage).

A 2GB SD card / USB stick has sufficient external storage
capacity for >5 years data.

6.8.1 SD card / USB stick

There are two methods of archiving to an SD card / USB stick:

An SD card / USB stick is kept in the transmitter

Data is archived to the SD card / USB stick automatically
at set intervals. Archiving continues until the SD card /
USB stick full; archiving then stops. To ensure all required
data is archived successfully, the SD card / USB stick
should be swapped periodically for an empty one. 

It is advisable to back-up critical data stored on an SD
card / USB stick regularly. The transmitter's internal
memory provides a buffer for the most recent data only
so, if data stored on an SD / USB stick card is lost, it can
be re-archived.

Data is copied to an SD card / USB stick when
required

When a SD card / USB stick is inserted into the
transmitter, the media status can be set to 

Online

 causing

unarchived data to be copied to the media – see Section
7, page 42 / 

Media Card

 menu level.

Note.

ABB's DataManager software can be used to store

and view data archived from the transmitter.

5 s

10 s

30 s

1 m

5 / 10 / 30 m

1 hr

30 

days

60 

days

180 

days

300 

days

300 

days

300 

days

Table 6.4 Internal (flash) memory storage capacity

Caution.

To avoid potential damage or corruption to data

recorded on an SD card / USB stick, take care when
handling and storing. Do not expose to static electricity,
electrical noise or magnetic fields. When handling the SD
card / USB stick take care not to touch any exposed metal
contacts.

Note.

It is not advisable to leave a USB stick in the

transmitter permanently.

Содержание Navigator 550

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды