ABB MID 1000, Руководство по эксплуатации продукта

Страница: 73 / 102

5 Calibration
When to calibrate
Mechanical units must be calibrated after installation, if parts of the transmission
are replaced, or if the resolver memory is lost.
Fine calibration defines the calibration zero position and updates the revolution
counters.
Robot calibration is described in Operating manual - IRC5 with FlexPendant , and
in the product manual for the robot.
Commutation of motors is described in Application manual - Additional axes and
stand alone controller .
Coordinated positioners and user frames are described in Application
manual - Additional axes and stand alone controller .
Calibration position
Any position can be defined as the calibration zero position but it must be possible
to move the axis to this position with good precision repeatedly. For example, this
can be a mechanical stop or another indicator that clearly shows the position.
Fine calibrating mechanical units
Use this procedure to fine calibrate the mechanical units.
Note Action
Mark the zero position for future
reference. Move the mechanical unit to a suitable zero position
for calibration. 1
On the FlexPendant ABB menu, tap Calibration . 2
Tap to select the mechanical unit. 3
Tap Fine Calibration . 4
Tap to select the axis and then tap Calibrate . 5
Updating revolution counters
Use this procedure to update revolution counters.
Note Action
Move the mechanical unit to the zero position for
calibration. 1
On the FlexPendant ABB menu, tap Calibration . 2
Tap Rev. Counters and then tap Update Revolution
Counters .
3
Tap to select the axis and then tap Update . 4
Product manual - Motor Units and Gear Units 73
3HAC040148-001 Revision: K
© Copyright 2011 -2018 ABB. All rights reserved.
5 Calibration