ABB MicroFlex e150, Руководство пользователя

Страница: 17 / 180

Introduction to the manual 17
Quick installation and start-up flowchart
Task See
Plan the electrical installation and acquire
the accessories needed (cables, fuses,
etc.).
Check the ratings, required cooling air
flow, input power connection,
compatibility of the motor, motor
connection, and other technical data.
Planning the electrical installation
(page
43
)
Technical data
(page
119
)
Check the installation site.
Requirements for the installation site
(page
27
)
Unpack and check the units (only intact
units may be started up).
Check that all necessary optional
modules and equipment are present and
correct.
Mount the drive.
Checking the delivery
(page
28
).
Mounting and cooling
(page
29
).
Route the cables.
Routing the cables
(page
39
)
Check the insulation of the supply cable,
the motor and the motor cable.
Checking the insulation of the assembly
(page
44
)
Connect the power cable.
Connect the motor cable.
Connect the control cables.
Connecting the power cables
(page
45
).
Motor connections
(page
52
).
Electrical installation: input / output
(page
59
).
Check the installation.
Installation checklist
(page
87
).
Start the drive.
Start-up
(page
89
)