ABB LWT300 series Скачать руководство пользователя страница 42

Страница: 42 / 108

User Guide

Press

Next

. The

Set PV

screen appears. This sets the type of measurement that you want to make.

Press

Edit

. The list of available measurements appears (default value:

Level

Scroll up or down the list and highlight the required measurement.

Press

. The measurement is selected.

For more information, see “Setting variables” on page 45.

Press

Next

. The

PV Unit

screen appears. This sets the measurement unit for the measurement type

that you just previously selected.

Press

Edit

. The list of available measurement units appears.

Scroll up or down the list and highlight the required measurement unit.

Press

. The measurement unit is selected.

For more information, see “Setting variable units” on page 45).

Press

Next

. The ↓

Empty/Zero

screen appears. This sets the lowest level that you expect to measure

in the vessel.

Press

Edit

Set the required value (see “Setting a value” on page 35).

Press

. The value is set.

For more information, see “Changing the empty/zero value” on page 64.

Press

Next

. The ↑

Full/Span

screen appears. This sets the highest level that you expect to measure in

the vessel.

Press

Edit

Set the required value (see “Setting a value” on page 35).

Press

. The value is set.

For more information, see “Changing the full/span value” on page 65.

Press

Next

. The

Max Level Rate

screen appears. This sets the expected rate at which the vessel fills

up or is drained.

Press

Edit

. The list of available values appears.

Scroll up or down the list and highlight the required value.

Press

. The value is applied.

For more information, see “Selecting maximum level rate” on page 51.

Press

Next

. The

Display Line1 View1

screen appears (this sets the measurement displayed on the

first line of text, as illustrated in Figure 30 on page 40).

Press

Edit

. The list of available values appears (default value:

Level

)

Scroll up or down the list and highlight the required value.

Press

Next

. The value is applied and you return to the beginning of the

Easy Setup

menu.

For more information, see “Configuring the display” on page 39.

Содержание LWT300 series













































































































Результаты поиска

Содержание LWT300 series

Отзывы:

Бренды по названию

Популярные бренды

ABB LWT300 series, Руководство пользователя

Результаты поиска

Содержание LWT300 series

Отзывы:

Бренды по названию

Популярные бренды