manualshive.com logo in svg

ABB LWT300 series, Руководство пользователя

Поделиться
Скачать
ABB LWT300 series Скачать руководство пользователя страница 28

24

 

User Guide

Installing a remote head LWT instrument

Certain process conditions (especially high temperatures) warrant the use of a remote head on the 
LWT300 instrument. Remote head instruments are also very useful for any reason where you might 
prefer or need to distance the head from the coupler (ease of access, floating roofs, etc.)

There are three main steps to installing a remote head instrument:

1 

Installing the probe-coupler assembly in the vessel (see “Assembling a segmented probe” on 
page 17 and/or “Attaching a probe to the coupler” on page 19)

2 

Installing the head on a support bracket in a remote location

3 

Connecting the probe-coupler assembly to the instrument head with the proper coaxial 
communication cable.

The following pages explain the last two steps.

The support bracket provided with your instrument is designed to be fixed on a pipe. It comes with an 
adapter that links the instrument head and coupler.

NOTICE

The sensor head must not be installed up side down. The instrument “neck” should always 
be lower than the HMI.

To install the remote head instrument:

1 

Locate a NPS 2-sized pipe strong enough to support the weight of the instrument head.

2 

Position the support bracket on the pipe and use the provided U-bolt, nuts and washers to fix it (see 
Figure 14).

—
Figure 14 

Positioning the support bracket

Head-coupler 

adapter

Содержание LWT300 series













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды