ABB Integritas, Быстрый старт

Страница: 23 / 31

QUICK START GUIDE
Page 23 Version 6.0
© 2021 ABB. All rights reserved.
Pulsar XL Alarm Inputs
Connector Description—Signal on Pin 1 Pin 2
TB11 (IN007) “ Dry ” No Voltage Binary contact input (default is AUX1 “ Air Conditioner Fail ”) No Voltage Return
TB12 (IN008) “ Dry ” No Voltage Binary contact input (default is AUX2 “ Door Open ”) No Voltage Return
TB13 (IN009) “ Dry ” No Voltage Binary contact input (default AUX3 “ High External Ambient ”) No Voltage Return
TB14 (IN010) “ Dry ” No Voltage Binary contact input (default AUX4 “ Low External Ambient ”) No Voltage Return
TB15 (IN006) “ Dry ” No Voltage Binary contact input (default “ Plant Battery Test (PBT) ”) No Voltage Return
TB16 (IN005) “ Dry ” No Voltage Binary contact input (default “ Remote Rectifier Standby/Emergency Power Off ”) No Voltage Return
TB17 (IN001) “ Dry ” 24V Biased Binary contact input 24V Source (default “ AUX9 Auxiliary 9”) 24V Source
TB18 (IN002) “ Dry ” 24V Biased Binary contact input (default AUX8, “ Auxiliary 8”) 24V Source
TB19 (IN004) “ Dry ” 24V Biased Binary contact input 24V Source (default OSA1, “ Open String ”) 24V Source
TB20 (IN003) “ Dry ” 24V Biased Binary contact input (default AUX6, “ Hydrogen Present ”) 24V Source
TB21 +24V Alternative external 24VDC back bias input for controller. +24V DC Return
Pulsar XL System Communications Ports
Connector Description—Signal on Pin 1 Pin 2
RECT DATA Connection to isolated rectifier RS485 Galaxy protocol serial bus. not applicable
1 - WIRE DATA Connection to 1 - Wire temperature probes. 1 - Wire signal on pin 1. 1 - Wire Return
Nebula Alarm Outputs
Connector Description—Signal on Pin 1 Pin 2
TB1 Power Critical Alarm Common
TB2 Power Major Alarm Common
TB3 Power Minor Alarm Common
TB4 Alarm R1 (default is RFA/MRFA) Common
TB5 Alarm R2 (default is ACFMACF) Common
TB6 Alarm R3 (default is BD/VLV) Common
TB7 Alarm R4 (default is GFI) Common
TB8 Alarm R5 (default is HVSD/HV) Common
TB9 Alarm R6 (default is multiple rectifier fail MRFA/MFA) Common
TB10 Alarm R7 (default is “ Check Battery ”) Common
Nebula Alarm Inputs
Connector Description—Signal on Pin 1 Pin 2
TB11 (IN007) “ Dry ” No Voltage Binary contact input (default is AUX1 “ Air Conditioner Fail ”) No Voltage Return
TB12 (IN008) “ Dry ” No Voltage Binary contact input (default is AUX2 “ Door Open ”) No Voltage Return
TB13 (IN009) “ Dry ” No Voltage Binary contact input (default AUX3 “ High External Ambient ”) No Voltage Return
TB14 (IN010) “ Dry ” No Voltage Binary contact input (default AUX4 “ Low External Ambient ”) No Voltage Return
TB15 (IN006) “ Dry ” No Voltage Binary contact input (default “ Plant Battery Test (PBT) ”) No Voltage Return
TB16 (IN005) “ Dry ” No Voltage Binary contact input (default “ Remote Rectifier Standby/Emergency Power Off ”) No Voltage Return
TB17 (IN001) “ Dry ” 24V Biased Binary contact input 24V Source (default “ AUX9 Auxiliary 9”) 24V Source
TB18 (IN002) “ Dry ” 24V Biased Binary contact input (default AUX8, “ Auxiliary 8”) 24V Source
TB19 (IN004) “ Dry ” 24V Biased Binary contact input 24V Source (default OSA1, “ Open String ”) 24V Source
TB20 (IN003) “ Dry ” 24V Biased Binary contact input (default AUX6, “ Hydrogen Present ”) 24V Source
TB21 +24V Alternative external 24VDC back bias input for controller. +24V DC Return
Nebula System Communications Ports
Connector Description—Signal on Pin 1 Pin 2
RECT DATA Connection to isolated rectifier RS485 Galaxy protocol serial bus. not applicable
1 - WIRE DATA Connection to 1 - Wire temperature probes. 1 - Wire signal on pin 1. 1 - Wire Return