ABB HT564933 Скачать руководство пользователя

Страница: 26 / 122

Operation Manual / TPL65VA32/33

Safety

Safe operation and maintenance

2.6

Page 24

Sept

ber

2015

L2464_

ion

Safe operation and maintenance

2.6

The instructions specified in this section are for the safety of personnel.

Together with the instructions in the Hazards during operation and

maintenance section, they allow the user to safely use the turbocharger.

Work safety and work area safety

WARNING

Risk of falling
There is the risk that someone can fall when working on the

turbocharger.



Do not climb on the turbocharger or on parts attached to it or use

these as climbing aids.



When working at levels above the head, use climbing aids and work

platforms suitable for this purpose.



Observe all general regulations for the prevention of accidents.



Do not work on the turbocharger if you are under physical or mental

stress.



Work only with suitable tools as well as equipment and working

materials that are in perfect condition.



Electric tools must be solidly earthed, and connecting cables may not

be damaged.



Keep the workplace clean, clear away loose objects and remove

obstacles on the floor.



Keep the floor, equipment and the turbocharger clean.



Have oil binding materials ready at hand and keep oil catch pans

ready or in position



Eliminate leaks.



Keep fire-protection materials and fire-extinguishing equipment ready.

Welding work



If welding work is being carried out above the turbocharger, make sure

to cover the filter silencer so that the filter mat is not damaged.



Remove combustible objects and substances out of the range of flying

sparks.



Cover all connections on the turbocharger so that no foreign objects

can get into the turbocharger.

2.6

Содержание HT564933



























































































































Результаты поиска

Содержание HT564933

Отзывы:

Похожие инструкции для HT564933

Бренды по названию

Популярные бренды

ABB HT564933, Руководство по эксплуатации

Результаты поиска

Содержание HT564933

Отзывы:

Похожие инструкции для HT564933

Бренды по названию

Популярные бренды