ABB GLA132 Series, Руководство пользователя

Страница: 17 / 131

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
17
Power Connections
The power connector is on the left side panel of the analyzer. (Figure 4)
The analyzer can be powered two ways:

Using the AC/DC power supply to the DC power inlet

Using the battery hook-up kit (Optional)
The battery voltage must be in the range of
11-30 volts DC. It has a continuous discharge
rate to power 80 watts (or higher).
Figure 4 shows the power entry connector and the power switch.
Figure 4: Power Connections and AC Voltage Selection Switch
The analyzer is equipped with a three-prong power plug. The third prong
of the facility electrical outlets must be grounded. Failure to ground the
third prong may result in electrical damage to the analyzer and electrical
shock to the operator.
Emergency Shutdown Procedure
If the analyzer malfunctions and requires emergency shutdown:
1. Turn off the analyzer using the left side panel on/off switch. (Figure 2)
2. Unplug the power cord from the analyzer. (Figure 4)
3. Notify trained service personnel that the analyzer needs repair or servicing.