ABB GLA132 Series, Руководство пользователя

Страница: 109 / 131

USER MANUAL | ICOS | INSTRUCTIONS | UM/ICOS-EN REV. B.2
109
b. Program the MIU channels for your samples.
c.
Check the MIU Enable checkbox. (Figure 108)
d. Select Save Changes. (Figure 108)
2. Setup the WVISS screen. Refer to the Configure the WVISS section of this appendix
for details.
Figure 109: WVISS Setup Panel
a. Click on the WVISS tab at the top of the Setup menu selection bar to access
the WVISS Setup Panel. (Figure 109)
b. Program the WVISS screen for the references.
c.
Check the Set by MIU checkbox. (Figure 109)
i. If the MIU tab has not been enabled, the WVISS screen becomes
grayed out, and a Message Box will appear, informing you to Enable
the MIU. (Figure 110)