ABB eCharger CUA2-F1T2L-16M3, Руководство пользователя, Страница: 32 / 56

32 2CCF018900R0002-CH | AC Charger for Electric Vehicles, Model eCharger
5. Installing the basement
Put the charging station unit on top of the floor mount kit and
tighten with 6 screws.
1 hex socket with head cap screw M6x20, SW 5
tightening torque 12 Nm
2 ribbed washer M6
3 safety nut M6, SW 10
Pull the power cable through the cable gland and fix it with the
cable gland.
Fig. 15: Set-up and tightening the charge unit
3.3 Installation on the wall
1. Installing the wall bracket
The wall bracket needs to be fixed to the wall with 6 screws
and dowels.
1 wall bracket
2 screws 6 mm
3 washer 6 mm
4 dowles
IMPORTANT (NOTE)
Material for fastening is not included in the
scope of delivery. The wall bracket can be used
as a drilling template.
2. Preparing the basis
See step 4 in section “Installation on a pole” (3.1).
3. Installing the basis
Put the charge unit on top of the wall bracket and tighten with
6 screws.
5 hex socket with head cap screw M6x14, SW 5
tightening torgue 12 Nm
6 ribbed washer M6
Pull the power cable through the cable gland and fix it with the
cable gland.
Fig. 16: Wall bracket