ABB eCharger CUA2-F1T2L-16M3, Руководство пользователя, Страница: 23 / 56

2CCF018900R0002-CH | AC Ladestation für Elektrofahrzeuge, Modell eCharger 23
Change from two to one column
8 Signalmeldungen
WICHTIG (HINWEIS)
Die Signalmeldungen der LED-Anzeige und des Tastenausgangs (LED in der Taste „Start/Stopp“) zeigen evtl.
vorhandene Störungen und den Systemzustand an.
Die für die Behebung möglicher Störungen gemachten Angeben richten sich an Fachpersonal.
Abb. 30: Rote LEDs signalisieren Fehler
LED Description—Solution
Green Ready to charge
Blue Charging at maximum speed
Blue/Red Charging at reduced speed or stopped due to overtemperature
Red 1x RCD fault—contact local electrician
Red 2x Charging station blocked—contact local operator
Red 3x Detected card id unknown—Register at abb.e-track2.nl
Red 4x Detected card id for transaction stop mismatch
Red 5x Card not accepted because customer is blocked
Red 6x PP value underrated—try another charging cable
Red 7x State D (lead battery) detected— This is not supported
Red 8x CP state unknown—try another charging cable
Red 9x CP diode not detected—try another charging cable
Red 10x PP state unknown—try another charging cable
Red 11x Boot process active—please wait...
Red 12x Generic error—contact support
Red 13x CP not connected (state A)
Red 14x PP not connected
Red 15x Lock failed
Red 16x Serial KWH meter fault
Red 17x Fuse tripped
Red 18x Second RCD tripped—contact local electrician
Red 19x Relay fault—contact local electrician
Red 20x Card expired —contact local operator
Red 21x Cable reconnect detected—not allowed