Drive control
Components required:
plastic optical fibre for distances up to 15 m
field bus module NxxA-0x; FCI (CI810);
AC70 (PM810); AC80 (PM825)
Star configuration up to 12 drives for FCI, AC70
and AC80
alternative:
APC2 + YPQ112 (max. 4 drives)
➀
Functionality:
Depends on the
field bus
module used, interface
e.g. to:
PROFIBUS with NPBA-02
with NMBP-01
CS31 with NCSA-01
AF100 with FCI (CI810) or AC70 (PM810)/
AC80 (PM825)
➀
further modules on request
You will find more detailed information on data
exchange in the specific fieldbus module docu-
mentation.
Operation by PC
Components required:
plastic optical fibre for distances up to 20 m
Monitoring network up to 200 drives (same as
for ACS 600)
HCS optical fibre cable up to 200 m.
see separate manual Configuration instruc-
tions NDBU 85-95 - Doc no.: (3ADW000100)
Functionality
:
Drives Window software package
➀
for com-
missioning, diagnosis, maintenance and trou-
ble-shooting; structure of connections see Tech-
nical Data
System requirements/recommendation:
PC (IBM-compatible) with 486 processor or
higher (min. 50 MHz)
8 MB RAM
DOS version 5.0 or later
Windows 3.1, 3.11, Windows95; Windows
NT4.0
VGA monitor
3 1/2" floppy disk drive
PCMCIA or ISA card slot
In addition to the options provided by the
CDP 312 control and display panel, there are
further functions available, and these are de-
scribed on the following page.
II F 2-13
➀
For further information see the specific publi-
cations
