ABB Conceptpower DPA 500, Руководство по эксплуатации

Страница: 98 / 114

Modifications reserved
Page 8/25
3 Input characteristics
Conceptpower DPA 500 UPS frame UPS module Unit
Power, rated 500 100
kW
Voltage (steady-state, r.m.s), rated: 3x380/220V+N
3x400/230V+N
3x415/240V+N VAC
Tolerance, referred to 400/230V -10 / +15 at <100% load
-20 / +15 at <80% load,
-30 / +15 at <60% load %
Frequency, rated 50 Hz
Tolerance, referred to 50Hz -30 / +40 %
Current (r.m.s), rated
(with battery charged and input 400/230V)
760 152 A
Current (r.m.s), maximum
(with charging batt. and input 400/230V) 835 167 A
Total harmonic distortion (THDi) ≤ 3.5 %
In-rush current < 100% of the rated current A or %
Power factor 0.99 @ 100% load
Rated short-time withstand current (I
CW
) 25 for 1s - kA, s
AC power distribution system: TN-S, TN-C, TN-C-S, TT
note: in static bypass mode or eco-mode TN-C and TN-C-S can cause PE current to rise above 5% of phase currents.
Phases required 3
Neutral required yes
ADDITIONAL AND USUAL INFORMATION
Connection: 5 wires, 3 phase + N + PE
Cable entry: Top or bottom
Accessibility: Frontal
Walk In/Soft Start: Yes
Back feed protection: Yes