background image

 

Network Xtreme Rack/Tower Series 

NXRT 

   

 

 

 

 

 

 

 

 

 

 

 

1000 VA - 3000 VA UPS   

 

 

 

 

 

 

 

 

User’s and Installation Manual

 

 

 

 

 

II

EMC Statements 

FCC Part 15 

NOTICE: 

Pursuant to section 15 of the FCC rules, this product has been tested and thereby 

complies to the conditions of a Class B digital device, which have been established for 
offering sufficient protection against dangerous interference for installation in a residential 
area. Installation and use of the equipment should comply with the instructions provided in 
order to avoid such interference due to the amount of radio frequency energy that is radiated 
and generated by the equipment. In spite of this, we cannot assure that a certain amount of 
interference may not occur in some installations. If, by turning on and off, it can be deduced 
that your radio or television reception is found to be influenced by harmful interference from 
the equipment, it is recommended to use one of the following preventive measures: 

* Place the receiving antenna in a separate location or orientation. 

* Ensure a greater distance is achieved between the receiver and the equipment. 

* Ensure that your equipment is connected to an outlet on a separate circuit than the 

receiver. 

* Contact a technician experienced with radio and TV or a dealer for further assistance. 

ICES-003 

This Class B Interference Causing Equipment meets all requirements of the Canadian 
Interference Causing Equipment Regulations ICES–003. Cet appareil numérique de la classe 
B respecte toutes les exigences du Reglement sur le matériel brouilleur du Canada. 

Declaration of Conformity Request 

Units labeled with a UL mark comply with the following standards and directives: 

Harmonic Standards: UL1778.

Summary of Contents for Network Xtreme Rack/Tower Series



































Reviews: