![background image](http://html1.mh-extra.com/html/vicon/v-poe-ups/v-poe-ups_manual_1013226001.webp)
PoE UPS 802.3af Gigabit Power Backup for Edge
Devices
Vicon Industries Inc. V-POE-UPS
Notice
Product specifications subject to change without
notice.
Technical Support
For 24-hour technical support call 800-34-VICON
(800-348-4266) or visit our website at www.vicon-
security.com.
Recycling and Disposal
Disposal instructions for old products
. The WEEE
(Waste Electrical and Electronic Equipment) national
environmental initiatives have been put in place to
ensure that products are recycled using best
available treatment, and recovery and recycling
techniques to ensure human health and high
environmental protection. This product is designed
and manufactured with high quality materials and
components which can be recycled and reused. Do
not dispose of your old product in your general
household waste bin. Check for information about the
local separate collection system for electrical and
electronic products marked by this symbol:
Use one of the following disposal options :
1. Dispose of the complete product (including its
cables, plugs and accessories) in the designated
WEEE collection facility.
2. If you purchased a replacement product, return
your older product (including all components) to the
retailer. The retailer should accept it as required by
the national WEEE legislation.
Vicon Industries Inc. All rights reserved.
Ordering information:
•
Part number:
V-POE-UPS
•
Wall Mount:
V-POE-UPS-BKT
Description: PoE UPS + Legacy Gigabit PoE Midspan
Document P/N : 8009-8273-00-01, Rev. 517
Safety Information
Important Safety Information
♦
Connect the V-POE-UPS to PoE networks only; do not
route to the outside plant.
♦
Only qualified personnel should install or remove the
V-POE-UPS.
: The V-POE-UPS “PoE IN" and "PoE Out" ports are
shielded RJ-45 data sockets. They cannot be used as Plain Old
Telephone Service (POTS) telephone sockets. Connect RJ-45
data connectors only to these sockets.
♦
The V-POE-UPS PoE IN and PoE OUT interfaces
are qualified as Safety Extra-Low Voltage (SELV) circuits
according to IEC 60950-1. Connect these interfaces only to SELV
interfaces on other equipment.
CAUTION!
♦
RISK OF EXPLOSTION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE.
♦
DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS
WARNINGS!
♦
Connect the V-POE-UPS only to the IP device for which it
was bought. Using the V-POE-UPS with other IP devices
can cause damage to the IP device.
♦
Read the installation instructions before connecting the
V-POE-UPS to its power source.
♦
Follow basic electricity safety measures whenever
connecting the V-POE-UPS to its power source.
♦
A voltage mismatch can cause equipment damage and may
pose a fire hazard. If the voltage indicated on the label is
different from the power outlet voltage, do not connect the
V-POE-UPS to that power outlet.
Functions and Features
The V-POE-UPS
Power over Ethernet (PoE) UPS offers a
compact and cost-effective power backup solution for IP phones,
WLAN access points, network cameras and other IP terminal
installations.
The V-POE-UPS
is powered by the PoE power provided over the
Ethernet cable charging batteries and provides 1 hour continuous
operation at power drop; PoE out as well as 12 VDC and I/O
contacts are provided.
The V-POE-UPS
supports up to 10/100/1000Mbps pass through
data rates.
The V-POE-UPS
can be powered by AUX 12-24 VDC or 24 VAC,
becoming a low power midspan charging the batteries and
providing 1 hour continuous operation at power drop; PoE out as
well as additional 12 VDC auxiliary and I/O contacts are provided.