ABB ACS880 Series, Инструкция к добавке

Страница: 11 / 50

Quick start-up guide 7
2
Quick start-up guide
Contents of this chapter
This chapter provides the instructions to start-up the Centrifuge and Decanter drive. It also
illustrates the default control connections for the Centrifuge and Decanter drive.
See,
•
Centrifuge drive start-up (page 8 )
•
Decanter drive start-up (page 10 )
•
Centrifuge I/O control connections (page 9 )
•
Decanter I/O control connections (page 11 )
Before you start
Make sure the drive is installed as per the mechanical and electrical instructions described
in the
Quick installation guide and/or Hardware manual.
Safety
WARNING! All electrical installation and maintenance work on the drive should be
carried out by qualified electricians only.
Never work on the drive, the brake chopper circuit, the motor cable or the motor when
power is applied to the drive. Always make sure by measuring that no voltage is actually
present.
WARNING! Make sure that the machinery into which the drive with brake control
function is integrated fulfills the personnel safety regulations. Note that the
frequency converter (a Complete Drive Module or a Basic Drive Module, as
defined in IEC 61800-2), is not considered as a safety device mentioned in the European
Machinery Directive and related harmonized standards. Thus, the personnel safety of the
complete machinery must not be based on a specific frequency converter feature (such as