ABB ACS880 Series, Инструкция к добавке

Страница: 35 / 50

Signals and parameters 31
Parameters listing
Actual signals
No. Name/Value Description Def / FbEq16
09
09 Centrifuge
Centrifuge and Decanter actual signals.
All parameters in this group are read-only unless
otherwise specified.
09.01 Centrifuge
status word
Status bit signals of Centrifuge. -
0000h...FFFFh Centrifuge status word. 1 = 1
9.02 Centrifuge
stage Shows actual stage of Centrifuge sequence. See
section
Centrifuge operation sequence on page 16 .
-
Stopped Drive is not running. 0
Accelerating to
fill speed Drive is accelerating to the filling speed. See parameter
77.07 Acc time to fill speed .
1
Pre wash Drive is at pre-wash speed. See parameter 77.04
Prewashing speed .
2
Filling Drive is at filling speed. See parameter 77.01 Fill speed . 3
Accelerating to
spin speed Drive is accelerating to spinning speed. See parameter
77.07 Acc time to spin speed .
4
Washing Drive is at washing speed. See parameter 77.05
Washing speed .
5
Spinning Drive is at spinning speed. See parameter 77.02 Spin
speed .
6
Decelerating to
unload speed Drive is decelerating to unload speed. See parameter
77.08 Dec time to unload speed .
7
Unloading Drive is at unload speed. See parameter 77.03 Unload
speed .
8
Decelerating to
stop Decelerating to stop after discharge. See parameter
77.09 Dec time to zero speed .
9
Bit Name Description
0 Accelerating to fill
speed 1 = Accelerating to filling speed. See parameter 77.01 Fill
speed .
1 Pre wash 1 = Sequence is at pre-washing stage.
2 Filling 1 = Sequence is at filling stage.
3 Accelerating to spin
speed 1 = Accelerating to spinning speed. See parameter 77.02
Spin speed.
4 Washing 1 = Sequence is at washing stage that is speed is more
than the value in parameter
77.05 Washing speed .
5 Spinning 1 = Sequence is at spinning stage.
6 Decelerating to unload
speed 1 = Decelerating to unloading speed. See parameter 77.03
Unload speed .
7 Unloading 1 = Sequence is at unloading speed.
8 Decelerating to stop 1 = Deceleration to stop after unloading.
9 Manual halt active 1 = Manual halt is active.
10...15 Reserved