ABB ACS880 Series, Инструкция к добавке

Страница: 36 / 50

32 Signals and parameters
Manual halt Manual halt is active. 10
9.03 Centrifuge
reference Shows final reference at different stages. -
0...18000 rpm Centrifuge reference speed. 1 = 1 rpm
9.04 Elapsed time Shows the completed sequence time from the start
command. -
0...32767 s Sequence completion time in seconds. 1 = 1 s
9.05 Remaining
time Shows the calculated value based on machine
parameters, section time and speed values. -
0...32767 s Remaining time in seconds. 1 = 1 s
09.10 Decanter
status word
Decanter status word. Bit representation of scroll status
information. -
0000h...FFFFh Decanter status word. 1 = 1
9.11
Bowl status
word Bowl status word. -
0000h...FFFFh Bowl status word. 1 = 1
Actual signals
No. Name/Value Description Def / FbEq16
Bit Name Description
0 Speed over limit 1 = Speed over limit reached.
1 Torque over limit 1 1 = Torque over limit 1 reached.
2 Torque over limit 2 1 = Torque over limit 2 reached.
3 D Speed reference
limit 1 = Delta speed reference limit reached.
4 Jogging active 1 = Jogging function is active.
5 Clean-up function is
active 1 = Clean-up and DC under voltage controller functions are
active.
6 Speed reference above
90% of limit 1 = Speed reference is above 90% of final speed reference.
7...15 Reserved
Bit Name Description
0 Ready Bowl drive is ready to start.
1 Modulating Bowl drive is modulating.
2 Started Bowl drive started.
3 Remote Bowl drive is in remote control location.
4 Tripped Bowl drive tripped due to fault.
5 Emg stop off Bowl drive stopped due to emergency.
6...15 Reserved